Physical Characteristics:
. Size: 1600mm x 800mm x 600mm
. Doors: Front and back doors and Police door on the side.
. Cooling: 2 fans on the top of the cabinet activated by a user settable thermostat.
. Cabinet Lights: Front and rear Florescent or Tungsten Ceiling mount or Goose neck Lamp.
. Weight: Less than 100Kg (excluding equipment).
. Thickness; 2.5 mm wall, reinforced for extra sturdiness, painted outside and inside off-white.
. Optional Door Open Alarm Switch for both doors.
. Front and rear cabinet light switch activated by any door.
. Cabinet Locks and Handle; Custom Design or Standard.
. Cables, NEMA interconnect harness and sockets included.
Power supply sub assembly: (included)
. Input voltage: Single Phase Grounded 176 VAC – 260 VAC.
. Input Frequency: 40HZ – 66 HZ.
. Maximum Current: 50 Amps.
. Max Power: 22K Watts.
. Standard Circuit Breakers include: 30A Main, 15A Equipment and 15A Auxiliary.
. Outputs: 2 Switching Power supplies - 24V 5A DC, 12V 2.5A DC; 12V AC and “Line Frequency Reference” signal; 220 VAC Signal Power, 220 VAC Flash Power and 220 VAC Equipment Power
. Unique “Power Bus” design for ease of maintenance and installation of additional equipment.
. Built-in maintenance convenience outlet.
. Built-in Lightning Arresters.
. Built-in Power Line Filter.
. Optional: Radio Wave Filter.
Output sub assembly: (included)
. Uses 2 Channel output cards (6-circuit), 900 watts maximum per channel (Green/Yellow/Red output).
. Up to 8 cards in a row to provide a full 16-phase configuration per rack.
. Includes two slots for standard NEMA TS2 BIU’s one slot at each end of the rack (BIU’s not included).
. 5-amp Dual circuit Flasher Unit with manual flashing frequency selection (1Hz standard).
. 6 dual circuit Flash Transfer Relays included.
. Selectable Red/Yellow flash per flash output (all Yellow Flash standard).
Police Door: (included)
. Provides standard switch functions: Flash On/Off, Signals On/Off, and Auto/Manual.
. Optional: Wireless remote police control.
Inside Technician/Maintenance Switches: (included)
. Provides standard switch functions: Flash On/Off, Control Equipment On/Off, and Stop Timing Auto/Off/On.
Cooling and ventilation: (included)
. 2 Fans on the top of the cabinet.
. Ventilation ducts at the lower door panel for air intake.
. Adjustable Thermostat temperature control.
Detector Rack (included):
. Standard NEMA TS2 Loop Detector Rack for Vehicle Detection Equipment:
. Designed for 16-detection channels with BIU and Loop Interface Panel.
. Rack includes provisions for up to four channels of Optical Preemption.
Operating Environment:
. Temperature: -40 to +70 degrees Centigrade.
. Humidity: 0 to 95% RH, Non-condensing.
. Will withstand heavy rain.
. Extensive dust resistance.
. Lightning protection.
Other Recommended Equipment (required but not included):
. Econolite ASC/3 series NTCIP NEMA TS2 controller.
. Any combination of 16 – Vehicle Phases, 16 – Overlaps and 16 – Pedestrian Movements.
. Up to four (4) Timing Rings
. Econolite MMU-16E NEMA TS2 Malfunction Management Unit.
. Econolite NEMA TS2 BIU (1 required per four output cards, and one required per detector rack).
. Any reputable brand Loop Detectors.
. Video Vehicle Detection System, by Iteris
. Any reputable brand Magnetic, Microwave, Ultrasonic, Infra-red and Motion Sensor detectors.
. Optical isolators for pedestrian push-buttons or preemption
. Ethernet switch for harsh environments by GarrettCom